Milling tools for counterboard materials

Rotary grinder

VHM-Rotary grinder, single cutter: shank 2.35mm, total length 38mm
VHM-Rotary grinder, single cutter: shank 3.0mm, total length 38mm
VHM-Rotary grinder, single cutter: shank 3.0mm, total length 40mm

VHM-Rotary grinder, double cutter: shank 3.0mm, total length 38mm

VHM-Pheripheriefräser: shank 2.35mm, head length 9mm, total length 38mm

VHM-Pheripheriefräser: shank 3.0mm, head length 9mm, total length 38mm

VHM-Pheripheriefräser: shank 3.0mm, head length 9mm, total length 40mm

VHM-Pheripheriefräser: shank 5.0mm, head length 9mm, total length 40mm

VHM-Positionslochbohrer: head length 9 mm

Counterplate materials

CF2 x EGS	Second to none on the market when it comes to Pertinax. Format 1070 x 1070mm, tolerance of thickness ±0.025mm. Available thicknesses: 0.40/0.45/0.50/0.55/0.60/0.65/0.70 to 1.30/1.50/1.80/2.00mm. Equipped with one layer of fibreglas on both the upper and lower side. e.g. article number: P2.040... ff
PTX 2x2	This paper is equipped with two layers of fibreglas on both sides, any other as CF2 x EGS. Available in thicknesses of 0.5 to 1.1mm (0.1mm steps) e.g. article number: P3.050... ff
Vetronit	Vetronit is based on pure Epoxy-fibreglass and therefore qualifies for extremly resistant properties. Format 1170 x 1070mm. Available in thicknesses of 0.40/0.45/0.50/0.60/1.00/1.50 and 2.00mm.
Lamination	All platers can be delivered with a self-adhesive lamination on the backside on request.

For further questions on Milling tools for counterboard materials send an email to office@wald.co.at or use our email form.

Increasing of our product range

We are working hard to get more and more helpfull parts and material for Your needs. So you should search from time to time through our Webshop and Webpage, you will be astonished....

Products list

Revision of our New Web side

We hope you appreciate our new side.
Of course there is a lot of work and we have to improove permanent, to give you all information you will need to make your job.
If you find some mistake we would be glad to get your message, just now and here!
Thank You!

Send an email to Wald Diecutting Systems